Get a free, in-home, no obligation quote from a trained garage door specialist who will come to your home and take measurements.
Get a free, in-home, no obligation quote from a trained garage door specialist who will come to your home and take measurements.
At Mesa, we are so confident that we are the low cost leader that we offer a 14 day lowest price guarantee. If within 14 days of our estimate, you get an estimate by a licensed contractor for the the same garage doors for less, we will refund you the difference. No wonder Mesa is the largest garage door installation company in the country.
Mesa is a model of good customer service. You can tell your Boss I was trained at APQC in Houston so very much appreciate when companies have a customer focus and system for improvement. I will do whatever you need to brighten your reputation.
This quality steel door comes with a baked on polyester enamel coating. To finish the door, the following procedures are recommended. To improve the adhesion of the paint, lightly sand the door’s surface with a fine steel wool to reduce gloss (STEEL WOOL ONLY). Do not expose bare metal. Any exposed bare metal be coated with a primer specifically intended for galvanized metal. Clean your door with a phosphate free laundry detergent. Rinse the door thoroughly with clean water and let dry completely before painting. Solvents are not recommended for cleaning. DO NOT PAINT IN DIRECT SUNLIGHT ~or~ IF THE DOOR SURFACE IS WARM TO THE TOUCH. Dark colors are not recommended where the door is exposed to direct sunlight for extended periods, such as a southern to western exposure. Dark colors absorb and retain the heat and can lead to peeling of the paint coloring. A top coating of a high quality 100% exterior latex paint is recommended for the door. At this point, care must be exercised not to paint joint and edge seals, in that, surfaces painted and pressed against the seal will adhere and cause seal damage. Also, to ensure the finish paint is compatible, always paint sample area to test adhesion. Finally, check your paint manufacturer’s instructions carefully for any additional recommendations and future maintenance requirements.